ANGLES

SIZE - MM (METRIC UNITS)	KG/MTR	MANUFACTURING STANDARD
38 x 38 x (4.5 to 6.0)	2.55 to 3.33	BS EN 10056 - 1 & 2
40 x 40 x (4.5 to 6.0)	2.70 to 3.52	BS EN 10056 - 1 & 2
50 x 50 x (4.5 to 8.0)	3.41 to 5.82	BS EN 10056 - 1 & 2
60 x 60 x (5.0 to 8.0)	4.57 to 7.09	BS EN 10056 - 1 & 2
65 x 65 x (5.0 to 8.0)	5.00 to 7.73	BS EN 10056 - 1 & 2 / JIS G3192:2005
70 x 70 x (5.0 to 8.0)	5.37 to 8.36	BS EN 10056 - 1 & 2
75 x 75 x (6.0 to 8.0)	6.85 to 8.99	BS EN 10056 - 1 & 2 / JIS G3192:2005
80 x 80 x (8.0 to 10.0)	9.63 to 11.90	BS EN 10056 - 1 & 2
100 x 100 x (8.0 to 10.0)	12.2 to 15.00	BS EN 10056 - 1 & 2

SIZE -INCHES (US CUSTOMARY UNITS)	LB/FT
1.496 x 1.496 x (0.177 to 0.236)	1.71 to 2.23
1.575 x 1.575 x (0.177 to 0.236)	1.81 to 2.36
1.968 x 1.968 x (0.177 to 0.315)	2.29 to 3.91
2.362 x 2.362 x (0.197 to 0.315)	3.07 to 4.76
2.559 x 2.559 x (0.197 to 0.315)	3.36 to 5.19
2.756 x 2.756 x (0.197 to 0.315)	3.60 to 5.61
2.952 x 2.952 x (0.236 to 0.315)	4.60 to 6.04
3.150 x 3.150 x (0.315 to 0.394)	6.47 to 8.00
3.937 x 3.937 x (0.315 to 0.394)	8.20 to 10.08

STEEL GRADES - 3 SP/PS,  S275 JR  &  ASTM A 36 etc

• Nearest dimensions in US customary units can be achieved
• All Alloy Steel Grades can be rolled if requirement is substantial.